EMS Installation 001
Starting at the top, we mounted the remote readout in the closet with all the other controls for the trailer. It's the one in the bottom right corner.
Date: 05/12/2007
Views: 3466
|
EMS Installation 006
I drilled a 1/2 inch hole under the remote head and another one through the bottom of the cabinet. You can pull the control unit for the tank level indicators and reach in to thread the cable through the holes down into the closet.
Date: 05/12/2007
Views: 3387
|
EMS Installation 007
If you remove the bottom floor of the closet, there is a large open space under there. I think it is where the bass unit for the sound system comes out. Another 1/2 inch hole at the bottom going through to the basement.
Date: 05/12/2007
Views: 3287
|
EMS Installation 008
Here's the other side of the hole in from the closet to the basement. From there, I ran the wire up and across the frame member to the forward side of the basement
Date: 05/12/2007
Views: 3303
|
EMS Installation 009
Here's the wire tied to the cross-member.
Date: 05/12/2007
Views: 3197
|
EMS Installation 010
At the forward part of the basement, I dropped the control wire down and fastened it with a single screw to the wall right above the EMS box.
Date: 05/12/2007
Views: 3151
|